9
10
Cleaning the Grill, Case
,
and Remote Control
A cloth dampened with cold water may be used
on the indoor unit if it is very dirty. Then wipe it
with a dry cloth.
Do not use a chemically treated cloth or duster to
clean the unit.
Do not use benzine, thinner, polishing powder, or
similar solvents for cleaning. These may cause
the plastic surface to crack or deform.
O
O
Never use water hotter than 40 C/104 F to clean
the front panel, it could cause deformation
or
discoloration.
CAUTION
CARE AND MAINTENANCE
Care and maintenance
Turn the system off before cleaning. To clean, wipe
with a soft, dry cloth. Do not use bleach or abrasives.
NOTE: Supply power must be disconnect
e
d before
cleaning the indoor unit.
Filter Handle
Cleaning the
A
ir
F
ilter
A clogged air filter reduces the cooling efficiency of
this unit. Please clean the filter once every 2 weeks.
1. Lift the indoor unit panel up to until it
clicks and
stays open
.
2.
Using the
handle of the air filter
,
lift it
up slightly
to take it out from the filter holder,
then pull it
downwards.
3. Remove the
air filter
from the indoor unit.
Clean t
he air filter
once
every
two weeks
using either
a vacuum cleaner
or water
.
T
hen dry it in cool place.
OPERATING INSTRUCTIONS
How the air conditioner works
1 hour
1 hour
Set
Temperature
Set
Temperature
Cooling
Heating
SLEEP operation
1 hour 1 hour
SLEEP operation
7 hours timer off
7 hours timer off
AUTO operation
When you set the air conditioner in AUTO mode, it will
automatically select cooling, heating
(cooling/heating
models only), or fan only operation depending on
the
temperature you have selected and the
temperature
of the room
.
The air conditioner will control room temperature
automatically
a
round the temperature set by you.
If the AUTO mode is uncomfortable, you can select
desired conditions manually.
SLEEP operation
When you push SLEEP button on remote controller
during cooling, heating(cooling & heating models only),
or AUTO operation , the air conditioner will
automatically increase (cooling) or decrease (heating)
per hour for the first 2 hours, then hold
steady for the next 5 hours
.
A
fter that
,
it will switch off.
This
feature
maintains both enery saving and
comfort
for
night operation.
DRYING operation
The fan speed will be automatically controlled under
dry operation.
During the dry operation, if the room temperature is
O
O
lower than 10 C
(50 F), the compressor stops operati
ng
and
will not
restart
until
the room temperature is above
O
O
12 C
(54 F).
Optimal operation
To achieve optimal performance, please note the
following:
Adjust the air flow direction
properly,
so that it is not
positioned
direct
ly
on people
, pets, or plants.
Adjust the temperature to achieve the highest comfort
level. Do not adjust the unit to excessive temperature
levels.
Close doors and windows
during
COOL or HEAT modes,
or performance may be reduced.
Use TIMER ON button on the remote control to
select a time
that
you want your air conditioner
to start
.
Do not put any object
s
near
the
air inlet
s
or air outlet
s
,
as this may reduce the
efficiency of the air conditioner
or even cause it to stop running
.
Clean the air filter periodically, otherwise cooling or
heating performance may be reduced.
Do not operate unit with horizontal louv
er
in closed
position.
NOTE:
In rooms with pets or heavy dust filters may
require more frequent cleaning.
