Once the mount is fixed to the intended
location, thread through the speaker cable
and attach the CLG140/ CLG160 (i). Secure in place
with the two grub screws (ii).
HINT: To assist in
threading the speaker
cable through the mount
we would advise having
the ball fixing arm
angled upwards.
4
3
Connect speaker’s cables in parallel with
the main run of cable from the amplifier
combining all positive cable together and all
negative cables together.
To Next speaker
To CLG140/
CLG160
From previous
speaker/ amp
Connections
should be made
with either
silicone filled
wire connectors
or appropriate
weather proof junction box (not included).
Note: Ensure that no ‘-’ and ‘+’ strands are
touching each other as this will cause a short
circuit that could damage your amplifier.
ii
i
CLG-W10 Foot Options
The CLG-W10 comes with outrigger anchors to be used for securing the subwoofer
in place to the floor i.e. a decking area. There are three threaded inserts on
the subwoofer lid with the screws already fitted. Remove the screws and then
reattach them with the outriggers.
NOTE: Screws for securing the outrigger anchors to the floor are not supplied and
should be selected according to the construction of the floor they will be going into.
System Setup
To power the system we would recommend using the IA800-2C amplifier. For optimum performance from the system
download the Monitor Audio IA800-2C preset DSP settings from our website:
monitoraudio.com
These preset DSP settings have been designed by Monitor Audio to bring the best performance from your satellite speakers
and subwoofer, with a crossover in place to direct only the low frequencies to the subwoofer and mid-highs to the satellites.
This will allow each component to focus on what is does best, adding clarity to the system and also protecting the satellite
speakers from potentially harmful/ overbearing sub frequencies.
NOTE: A maximum of 16 satellite speakers can be used per channel, or 3 subwoofers per channel.
Monitor Audio Preset DSP List
CLG-W10(CLG160)
- CLG-W10 subwoofer for use with the CLG160
CLG-W10(CLG140)
- CLG-W10 subwoofer for use with the CLG140
CLG-W12(CLG160)
- CLG-W12 subwoofer for use with the CLG160
CLG-W12(CLG140)
- CLG-W12 subwoofer for use with the CLG140
CLG140/CLG160
- For use with either the CLG140 or the CLG160
monitoraudio.com
5
ENGLISH
