5
Fine-tuning the loudspeakers
The following adjustments can be made to your CP in-ceiling loudspeakers as follows:
1.
Pivoting tweeters (all CP
In-Ceiling
models) can be tilted up to 18 degrees in all directions to provide
optimum coverage if the following applies:
2.
If the speakers are widely separated such that the music fails to blend into a central image when
operated in stereo mode then tilt the tweeter towards the listening area
.
3.
If the Soundstage seems too confined tilt the tweeter away from the listening
area.
4.
For further fine-tuning options of your CP
In-Ceiling
speakers please go to page 6.
Specifications -
In-Ceiling
Model
Gold CP
In-Ceiling
Silver CP
In-Ceiling
Bronze CP
In-Ceiling
Frequency
response
55Hz – 30KHz
60Hz – 30KHz
62Hz – 22 KHz
Impedance
(nominal)
8 Ohms
8 Ohms
8 Ohms
Sensitivity (1W@1M)
89dB
89dB
88dB
Maximum SPL
106.5 dBA
105.8 dBA
105 dBA
Power handling
120W
100W
80W
Recommended
Amp
requirements
30-120W
30-100W
20-80W
Bass alignment
Sealed enclosure
Sealed enclosure
Sealed enclosure
Drive unit
complement bass
1x 6.5” C-CAM bass driver
featuring RST technology
1x 6” C-CAM bass driver
1x 6.5” MMP2 second
generation Metal Matrix
Polymer
Drive unit
complement
tweeter
Pivoting 25mm C- CAM gold
alloy dome with
high power ceramic
magnet system
Pivoting 25mm C- CAM gold
alloy dome with
rare earth magnet
Pivoting 25mm C- CAM gold
alloy dome with rare earth
magnet
Overall diameter
281mm (11 1/16 inch)
281mm (11 1/16 inch)
281mm (11 1/16 inch)
Overall depth
181mm (7 1/8 inch)
181mm (7 1/8 inch)
181mm (7 1/8 inch)
Cut-out hole
diameter
250mm (9 7/8 inch)
250mm (9 7/8 inch)
250mm (9 7/8 inch)
Mounting depth
mm (inch)
175mm (6 7/8 inch)
175mm (6 7/8 inch)
175mm (6 7/8 inch)
Controls
+3db / 0dB / -3dB
High frequency
attenuation switch.
+3db / 0dB / -3dB
Mid-range frequency
attenuation switch.
+3db / 0dB / -3dB
High frequency
attenuation switch
N/A
Fixing type
4 position ‘dog’ type fixings
4 position ‘dog’ type fixings
4 position ‘dog’ type fixings
Connection
Gold plated ‘push’ type
terminals
Gold plated ‘push’ type
terminals
Gold plated ‘push’ type
terminals
Baffle material
MDF
MDF
MDF
Back box/
mounting flange
material
Mineral filled ABS plastic (UL
V1 fire rated)
Mineral filled ABS plastic (UL
V1 fire rated)
Mineral filled ABS plastic (UL
V1 fire rated)
Unit weight Kg
(lb)
3.0Kg (6.6Ib)
2.5Kg (5.5Ib)
2.4Kg (5.3lb)
