Moniteq Crypto-Lock CC-8521B, Instruction Manual

Page: 4 / 16

4
Introduction
The Crypto-Lock Model CC-8521B is a single door access control system providing
keypad control using a single 3-6 digit PIN code. It can be used with most magnetic
and electric strikes, including doors with both features. Typical installation is illustrated
in Figure 1. A wiring diagram is affixed to the interior of the control unit door and in
figure 2 of this manual.
The system includes a built-in 12VDC and 24VDC, 4A power supply to power electric
strikes and magnetic locks, eliminating the need for a separate power unit. It provides
adequate power to reliably open heavy-duty locking devices such as Von Duprin* rim
latch retraction units and Sargent & Greenleaf Brute* electric locks. The control unit
can house two optional 12V, 7AH sealed lead acid batteries (not included) and
maintain them at full charge. Audible and visual warnings will occur when the charge
level is low.
Security features include anti-follow, propped and forced door alarms, invalid PIN
penalty delays and adjustable time durations of lock release after entry of a valid PIN
code. A release button (not provided) can be used to remotely unlock the door from a
location on the secure side of the door.
The weatherproof, 10-button, stainless steel, spy-proof keypad unit includes a green
LED which illuminates when the lock is released. A # button on the keypad activates
an annunciator in the control unit and generates output signal for an optional external
audio or visual device (not included).
*Von Duprin is a registered trademark of the Ingersoll-Rand Company; Brute is a registered trademark of
Sargent & Greenleaf, Inc.