Moni FARMER, Instruction Manual

Page: 16 / 21

•Using the product behind vehicles, near or on high traffic, streets, rivers, slopes, escalators or other dangerous places is
strictly forbidden.
•
Never use on lawns or other grass areas, on or near steep slopes.
•Avoid sandy or other hard and rough surfaces. Do not use in poor weather (snow, rain, strong wind), or at places that are
poorly lit, or places with poor visibility or with obstacles.
•Never use in the dark.Your child may encounter unexpected obstacles resulting in an accident. Use only during the day or
at places that are well lit.

It is forbidden to shorten the terminals of the electric cables or to add other electric parts.

Periodically check the wires, bushings and connectors.

Do not allow children to touch the wheels or be close to them, when the battery operated tractor is in motion.

The product has adjustable safety belts. Instruct the children to fasten their seat belts before use in order to guarantee
their safety.

Some accessories of the tractor may get damaged during improper driving, be careful.

DO not use suddenly the forwards/backwards switch, while the tractor is in motion. It can be used only while the toy is
stopped in place.

When restarting the motor there may be some sparks. It is forbidden to start the tractor in highly flammable and explosive
environments such as petrol stations.

An adult must read this instruction carefully and give correct guidelines to children before playing with this product. Show
them how to start and release the pedal, how to stop the tractor and how to act in case of malfunctions.

When you stop using the toy, turn off the power.

Do not change anything in the body and parts of the product. This may lead to destabilization of the toy and injury to your
child.

The following must be confirmed before using the product:
•
Important! Before use of the product for the first time, the battery must be charged for 4 to 6 hours, but no more than 10
hours. Only an adult can charge and recharge the battery.
•Check regularly all screws, nuts and safety coverings and tighten them if necessary!
•Before each use check the seat. Whether it is correctly placed and mounted (installed) with the help of a screw.
•In order to avoid incidents, make sure that the battery operated tractor is entirely safe before use.
PARTS LIST
See Figure PD: Before you start to assemble the battery operated tractor, take the parts out of the packaging and check
whether all parts indicated in the list below are present. Keep the packaging until you have completely finished the
assembly.
1. Tractor body
– 1 pc; 2. Tractor wheel – 4 pcs; 3. Rear driving wheel – 2 pcs; 4. Ф10 washer – 4 pcs; 5. Lock nut – 6 pcs;
6. Hubcap for the trailer wheel
– 4 pcs; 7. Hubcap for the rear tire of the tractor – 2 pcs; 8. Steering wheel – 1 pc; 9. Ф5
washer
– 1 pc; 10. M5X30 machine screw – 1 pc; 11. Seat – 1 pc; 12. Φ4x12 round head screw – 5 pcs; 13. Trailer linkage –
1pc; 14.
Φ4x12 flat head screw – 12 pcs; 15. Bushing – 2 pcs; 16. Trailer axle – 1 pc; 17. Trailer bolt – 1 pc; 18. Trailer
support
– 2 pcs; 19. Trailer base – 1 pc; 20. Side rail – 2 pcs; 21. Front rail – 1 pc; 22. Exhaust pipe – 1 pc; 23. Spanner – 2
pcs; 24. Charger
– 1 pc; 26. Φ8 washer – 6 pcs.
15
ASSEMBLY STEPS
ATTENTION ! Adult assembly required.
•Note: Some parts may be factory assembled.
•Take care when unpacking and assembling the battery operated tractor. Do not let kids play with the parts or helping with
the assembly. Risk of injury. Small parts, sharp edges and sharp peaks at the unassembled battery operated tractor.
•Set all parts aside before assembly. Keep all packs until you finish in order not to lose any of them by accident.
•After each step you must check that the individual parts are properly positioned and securely fixed. Just follow the individual
steps and understand well the assembly figures.
•Do not over tighten to avoid damaging any part.
A. Installing the trailer linkage and driving wheel
– Figure A:
1.Turn the tractor body upside down.
2.Fit the trailer linkage to the vehicle body.
3.Insert four
Ø4x12 flat head screws through the trailer linkage and into the vehicle body and tighten with a screwdriver.