7
VIBRATION ALARM
The tracker has a built-in motion sensor that detects vibrations.
When ‘armed’ (alerts on), a shock/vibration will cause the tracker to send you an alert.
These alerts can be a either a text message, a phone call or both.
See the programming chart for programming details.
The length of vibration can be adjusted so as to avoid possible false alerts.
Smooth roads may be insufficient to cause a shock alert.
SPEED ALERT
A speed limit can be set between 50~300kph.
Speeding over the set speed limit will send a text alert to your mobile phone.
This feature can be turned on or off.
MOVE ALERT
This is similar to geo-fence but is not at a fixed location – it is the location of where your vehicle is
parked. When the tracker has been in a stationary position for more than 3 minutes, a ‘move’
command can be sent setting a permitted radius of travel.
This can be set between 100~5000m.
Movement outside this radius will send a text alert to your mobile phone.
This feature should be turned on or off as and when needed.
If move alert is on, then geo-fence is automatically off.
‘Move’ should be set when parking and unset when you wish to drive.
MAIN POWER ALERT
If the main power to the tracker is disconnected, the tracker will send an alert to your mobile
phone.
IGNITION ALERT
When armed, if the ignition of the vehicle is turned on, you will receive an alert.
APP ICONS
‘Real time tracking’
– shows current / last reported position
‘Historical route’
– graphically shows the route taken over different time periods
‘Geofence’
– allows you to set defined areas
‘Issue command’
-- sets tracker parameters & commands
‘Device info’
- Details about the tracker, SIM number etc
‘Device message’
- Record of texts sent from device
‘Alarm setting’
- Define which alarms/alerts are required
‘Logout’
- Closes the APP
Most of the tracker functions can be controlled from within the APP under ‘
issue command
’ and
‘
alarm setting
’.
We suggest you explore the APP’s features and try them out.
