ENGLISH
1
Moto Alarm System
MONGOOSE PENTACLE M-1
USER GUIDE
Welcome
Thank you for choosing the MONGOOSE PENTACLE M1 Alarm system for you motorcycle. The system provides
many unique features designed to increase the protection of your machine or to customize its operation to meet your
individual requirements.
Some of these features can only be adjusted by your dealer and are dependent on local regulations. For these
reasons, we advise you to discuss the options available with your installing dealer.
We also advise you read this manual carefully and keep it safe for future reference.
You remote control
MONGOOSE PENTACLE M1 systems come supplied with 2 remote controls as standard. It is possible to add up
to 4 extra remote controls (6 in total).
Standard
Conversion completed
What the buttons do:
There are two buttons on your transmitter.
The
GREY
button controls the main
arm/disarm
functions of the system.
The
BLACK
button controls secondary functions such as movement sensor deletion (
Ferry Mode
) and
panic/
locate
.
Combinations of these buttons control further functions (described later in the manual).
Should you wish to change the operation of the alarm from the factory default setting, refer to the relevant section
within this manual for information on how this effects the operation of the system. If you require further guidance you
should contact your installing dealer.
Changing your remote control battery
Each remote control contains a single longlife lithium battery (CR1616). This battery will normally last least 12
months. Normal range for the remote control is around 10 meters. As the battery within the remote control comes to
the end of its life, you will notice a reduction in its range and the battery should be replaced.
32
Охранная система для мотоциклов
