36
VFF Vent Free Fireplace System
Monessen • VFF 32/36 Owner Manual • 20308184 • Rev M • 1/22
OPTIONAL ACCESSORIES
INSTALLING OPTIONAL FIREBRICK
PANELS
NOTE:
Firebrick liner kits may be used only with the VFF
vent free fireplace systems. Please verify the size and
model number of your insert to be certain the kit you pur
-
chased is correct.
KIT CONTENTS:
• One (1) Center panel
• Two (2) self-drilling #8 screws
• One (1) Left panel
• Two (2) Brick retainer brackets
• One (1) Right panel
TOOLS REQUIRED:
Drill with 1/4" hex head or Phillips bit
INSTRUCTIONS:
1. Remove screen frame, stones, fireglass or logs (if ap
-
plicable) per the VFF Installation and Operating In
-
structions.
2. Place rear ceramic firebrick panel against the center of
the rear wall of the firebox. Place on rear log support
bracket.
3. Place left and right ceramic firebrick panels against
firebox sides and attach at the top with retainer bracket
with supplied self drilling screws.
4. Replace fireglass, stones and/or logs as applicable
and re-install screen frame.
Figure 66.
Install Side Firebrick
Panel
KT1434
install firebrick
Retainer
Brackets
KT1435
installed
Figure 67.
Install Back Firebrick Panel