background image

Customer:

Lot/Address

Model (circle one): 

LCUF32CR-B     LCUF36

C

R-B

      LCUF42CR-B

YES

IF NO, WHY?

Wiring has been installed if necessary.

Date Installed:

Location of Fireplace:

 

Installer:

Dealer/Distributor Phone 

No: 

Serial 

No

:

Fireplace Install

ATTENTION INSTALLER:

Follow this Standard Work Checklist

This standard work checklist is to be used by the installer in conjuction with, not instead of, the instructions contained in this installation 

manual.

WARNING! Risk of Fire or Explosion!

 Failure to install fireplace acording to these instructions can lead to a fire or 

explosion.

Verified clearances to combustibles. (Pg. 11)

Fireplace is leveled and secured. (Pg. 13)

Hearth extension size/height decided. (Pg. 12)

Outside air kit installed. (Pg 15) Optional

Comments communicated to party responsible

460

7

-902 • Rev 

A

 • 

4/18

• Photographing the installation and copying this checklist for your file.

Combustible materials not installed in non-combustible areas.

(Builder/Gen. Contractor)                   (Installer)                                  (Date)

Comments:

 Further description of the issues, who is responsible (Installer/Builder/Other Trades, etc.) and corrective action needed: 

• That this checklist remain visible at all times on the fireplace until the installation is complete.

__________________________  by ______________________on _________

Hearth extension installed per manual requirements.

Verified all clearances meet installation manual requirements.

Mantels and wall projections comply with installation manual requirements.

Hearth & Home Technologies recommends the following:

Finishing 

Fireplace Setup 

All packaging and protective materials removed.

Refractory installed correctly. 

Firescreen installed properly.

Manual bag and all of its contents are removed from the fireplace and given to the 

party responsible for use and operation.

Blower kit installed properly. (Optional)

Light kit installed properly. (Optional)

Door kit installed properly. (Optional)

3

Monessen • LCUF32/36/42 Installation and Operating Manual • 4607-900 • Rev D • 3/21

Summary of Contents for LCUF32CR-B




















Reviews: