HBDV7 Series Direct Vent Gas Fireplace
54D8000
43
LG745
HBDV log 2
Right Log
#
LG745
Figure 63
FINAl INStAllAtIoN
6. Place Right Log # by matching the two holes on the
bottom of the log with the two pins located on top of
the burner. When this log is in place it is positioned
at an angle and the right side of the log is seated over
the right tong of the grate.
Figure 63
LG746
HBDV Log #3
Left Log #3
Figure 64
LG746
7a. For 400 models, place Left Log #3 by matching
the notch on the side of the log with the protru-
sion on the rear log. Set the left side of the log
over the cross bar of grate by placing the notch
of the log on the grate bar. Be sure the log is
tilted backward. When this log is in place, it is
seated sideways.
Figure 64
7b. For 300 models, place Left Log #3 by matching
the notch on the side of the log with the protru-
sion on the rear log. Set the left side of the log
over the grate bar in the front by placing the
notch of the log on the grate bar. Make sure the
log is tilted backward. When this log is in place,
it is seated sideways.
Figure 64
LG747
HBDV logs 4 & 5
Mid Top
Log #4
Right
Top Log
#5
lG747
Figure 65
8. Place Mid Top Log #4 by matching the two
notches on the bottom of this log with the
two protrusions on log #1 & . This log, when
seated, fits in the middle above logs 1 & .
Figure 65
9. Place Right Top Log #5 by matching the
two notches on the bottom of this log with
the two protrusions on log #1 & . This log,
when seated, is positioned toward the right.
Figure 65
