20308722
3
10. Position fireplace in final installation location. Secure
the installation brackets to the wall framing. Install
electrical supply, gas supply and venting according to
installation instructions supplied with your fireplace.
11. Install facing material, following the parameters in the
figure below. Caulk around facing material to weather-
seal facing kit. Figure 7.
Figure 6.
Installation bracket and sheathing
KT1267
finish install
Sheathing can go to
zero clearance on
sides of unit.
Adjustable installation
bracket
KT1269
finish look
Noncombustible
facing material must
overlap face by at
least 3/4"
Noncombustible facing
material must not extend
beyond this edge
Seal these seams with caulk
Figure 7.
Facing material installed
Noncombustible facing
material must not extend
beyond this edge
Noncombustible facing
material must not extend
beyond this edge
Noncombustible facing
material must not extend
beyond this edge
Noncombustible
facing material must
overlap face by at
least 3/4"
Noncombustible
facing material must
overlap face by at
least 3/4"
Noncombustible
facing material must
overlap face by at
least 3/4"
