240114
14
2. INSTALLATION INSTRUCTIONS
INSTALLATION SPECIFICATIONS
•
This appliance requires a standard 115 Volt A.C. /50Hz electrical outlet with three-prong ground
。
•
This
appliance is designed to be
installed built-in or free standing
.
•
Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct
sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Ambient
temperature below 59°F (15°C) or above 77°F (25°C) will hinder the performance of this appliance.
This
unit is not designed for use in a garage or any other outside installation.
•
Avoid locating the appliance in moist areas.
•
Plug the appliance into dedicated, properly installed-grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning
power and/or grounding should be directed toward a certified electrician or an authorized Service
Center.
This unit is not designed to be installed in an RV or used with an inverter.
•
After plugging the appliance into a wall outlet, allow the unit to cool down for 3 ~ 4 hours before placing
wine bottles in the appliance.
•
This wine cooler come with adjustable legs to help level the unit
BUILT-IN INSTALLATION
The cutout dimension illustrated (see below) allows for door swing and access to the pull-out shelves when
installed as a built-in appliance. If installing between frameless cabinets, a ¼” wide filler strip or side panel
may be needed on the hinge side. The filler strip will act as a spacer between the appliance case and
adjacent cabinet door swing. The width of the opening must include the filter panels.
Note:
The door should protrude at least 1” beyond the surrounding cabinets.
Models 132DFS & 180DFS
15
½ "
24
"
24
"
24
"
56" - 72"
Model MVBC48DFS
Model MVBC27FS
