Monark 828 novo mini, Manual

Page: 14 / 20

14 MONARK 828 E
ENGLISH
DISPLAY
To start the display, press the on / off button on the right
side of the bike, see fig: On / off.
Start the measurement by pressing "play”
Pause the measurement by pressing "pause"
Reset the device by pressing "stop"
Change units
It is possible to switch between kP and watt. You do this
by going to "Settings" and selecting Kilopond or Watt as
"primary unit".
Sleep mode
After ten minutes of inactivity, the display goes into
sleep mode. To restart the display, press on the screen or
start pedalling.
ANT+ / BLE
When the display is connected to an external device,
the ANT+ / BLE symbol is displayed in the upper right
corner.
Display view
To change the display of data in the display, swipe your
finger either to the right or to the left.
RUN
STOP
PAUSE
SETTINGS
BACK
CONNECTED EXTERNAL DEVICE VIA ANT+
Change units
Break lock to chestbelt
Total use, time, distance
Calibration mode
Fig: View 1 Fig: View 2 Fig: View 3 Fig: View 4
NOTE!
Do not expose the electronic display to direct
sunlight or extremely high temperatures. Do
not use solvents when cleaning, only a dry
cloth.
Settings
ANT+ connected
Settings
BLE connected
CONNECTED EXTERNAL DEVICE VIA BLE (BLUETOOTH)
(DOES NOT SUPPORT HEART RATE)