4-14
System Administrator’s Guide
SNMP Netware Traps
You can configure the SNMP Netware traps.
1.
From the Alerts and Traps screen, click
SNMP Netware Traps
.
2.
Enter a community name, IPX address, IPX Node address, and the
trigger conditions for an email alert. You can enter up to four IPX
addresses.
Note:
The S1 port acts as a toggle switch to enable or disable the alerts.
You must select S1 to enable the alerts.
3.
Click
Submit
.
4.
Click the reset link at the bottom of the screen. The Reset Server screen
appears.
5.
Click
Submit
and wait five seconds for the print server to reset. Even
though you submitted your changes, they do not take effect until you
reset the print server.
You must re-enter your access password to make any further changes to
the printer settings.
Summary of Contents for Sierra Sport2 9460
