background image

 

 

Safeguards and Precautions

 

 
 
 

 

Laser hazards 

 

Eye  injury  from  beam  -  Do  not  look  into  the  direct  or  reflected  beam;  can  cause  eye 
injury up to 110 ft (34 m) away. 

 

Visual  interference  (glare)  with  pilots  and  drivers  -  Interferes  with  vision  up  to  2400  ft 
(730 m) away.  Can be a distraction  up  to 4.5 miles (7.3 km) away.  

NEVER  point  any 

laser towards aircraft or vehicles; it is unsafe and illegal. 

Safe use guidance 

Class  3R  lasers  are  safe  when  handled 
carefully.    Do  not  look  into  the  beam.  
Avoid accidental exposure to eyes.  Do not 
aim  at  aircraft.   

This  is  not  a  toy.   

Always 

supervise children. 

 

Read  and  follow  all  instructions  in  this  manual  carefully,  and  retain  this 
manual for future reference. 

Do  not  use  this  instrument  in  any  manner  inconsistent  with  these  operating   
instructions or under any conditions that exceed the environmental specifications 
stated. 
This  instrument  is  not  user  serviceable.    For  technical  assistance,  contact  the 
sales organization from which you purchased the product. 

WARNING - Use only the “PR Universal” charger supplied with the product. 

In  order  to  comply  with  EU  Directive  2012/19/EU  on  Waste      Electrical 
and  Electronic  Equipment  (WEEE):   

This  product  may  contain  material 

which  could  be  hazardous  to  human  health  and  the  environment.    DO  NOT 
DISPOSE of this product as unsorted     municipal waste.  This product needs 

to  be  RECYCLED  in  accordance  with  local  regulations,  contact  your  local  authorities 
for more information.  This product may be returnable to your distributor for recycling - 
contact the  distributor for details.

 

Diode Laser

 

Max. output power: <5 milliwatts 
Wavelength: 650 nanometers (visible light) 
Min. divergence:  0.5 milliradian 
Output:  Continuous (CW) 
Laser hazard classification:  Class 3R, “Caution” 

Manufacturer: 

Monarch Instrument 
15 Columbia Drive 
Amherst, NH  03031  USA 
Country of Origin: USA 
Contact info: www.monarchinstrument.com

 

Summary of Contents for SLS-115

















Reviews: