6
To select a flash rate from a Preset (memory) location:
1.
Press the MODE button once. The
÷2 ×2
icon will be displayed.
2.
Press the MODE button again (without pressing the rubber tuning
button in between). “RECALL” will be displayed.
3.
Rock the tuning button up or down to select a preset flash rate.
The display will show “R MEMX”, where X=the present location (1-
8), and then display the flash rate saved in that location and begin
flashing at the specified flash rate with each press of the button.
4.
Press the MODE button to return to the Internal Mode using the
selected flash rate.
To store the current flash rate in a Preset (memory) location:
1.
Press the MODE button once. The ÷2 ×2 icon will be displayed.
2.
Press the MODE button a second time (without pressing the rubber
tuning button in between). “RECALL” will be displayed.
3.
Press the MODE button again (without pressing the rubber tuning
button in between). “STORE” will be displayed.
4.
Rock the tuning button up or down to select the location in which
to store the current flash rate. The display will show “S MEMX”,
where X=the present location (1-8), and then display the flash rate
saved in that location.
5.
Once you have selected a preset location to overwrite, press
the MODE button to save the current flash rate in that location.
“SAVING” will be displayed and then you will return to the Internal
Mode.
