19
5.4.4 OUTP (OUTPUT) Menu
This menu sets the pulse polarity of the output signal that will
trigger a device connected to the output jack. The options are
nEG
for negative pulse or
POS
for positive pulse.
Press the MENU button to enter the OUTPUT menu. The current
edge setting is shown on the top line with OUTP on the lower line.
The On-Target indicator will be on for the currently selected value.
Use the arrows on the joystick to select the desired value.
Press the MENU button followed by the Power button to save the
value.
To exit without changing the polarity press the Power button
5.4.5 BKLIT (Backlight) Menu
This menu option turns the backlight of the display ON or OFF.
Press the MENU button to enter the Backlight menu.
Use the arrows on the joystick to select the desired value. The
backlight will change in real time.
Press the MENU button followed by the Power button to save the
value.
To exit without changing press the Power button.
5.5
Memory (MEMRY) Menu
The Memory (MEMRY) menu is used to store (save) or recall up to
10 different strobe settings. The settings that are saved and recalled
are the flash rate, brightness and JOG settings (PHASE and TIME). All
other settings on the unit remain the same.
MENU button POWER button On-Target indicator Joystick arrows
