background image

18

5.4.2  UNITS Menu

This menu option selects the Engineering Units used to display the 

flash rate or speed.  The choices are: 

FPM

  Flashes per Minute (not available in TACH Mode)

FPS

 

Flashes per Second (same as Hz; not available in TACH Mode)

RPM

  Revolutions per Minute

RPS

  Revolutions per Second (same as Hz)

Press the MENU button to enter the UNITS menu. Unit is shown 

on the top line with the current engineering unit on the lower line. 
The On-Target indicator will be on for the currently selected value.

Use the arrows on the joystick to select the desired value.

Press the MENU button followed by the Power button to save the 

value.

To exit without setting the units, press the Power button        .

5.4.3  INPUT Menu

This menu sets the pulse polarity of the external signal that will 

trigger the strobe. The options are 

nEG

 for negative edge or 

POS

 

for positive edge.

Press  the  MENU  button  to  enter  the  INPUT  menu.  The  current 

edge  setting  is  shown  on  the  top  line  with  INPUT  on  the  lower 

line. The On-Target indicator will be on for the currently selected 

value.

Use the arrows on the joystick to select the desired value.

Press the MENU button followed by the Power button to save the 

value.

To

 exit without changing the polarity, press the Power button.

MENU button          POWER button          On-Target indicator         Joystick arrows

MENU button          POWER button          On-Target indicator         Joystick arrows

Summary of Contents for 6243-010









































Reviews: