background image

SAFEGUARDS AND PRECAUTIONS

WARNING - This product emits a visible beam of laser light.
Avoid exposure to the laser radiation.  The use of optical viewing
aids (binoculars, for example) may increase the ocular hazard.

CAUTION - The laser beam should not be intentionally aimed at people or
animals.

CAUTION - Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.

WARNING - Use only the “PR Universal” charger supplied with the product.

Read and follow all instructions in this manual carefully, and retain this
manual for future reference.

Do not use this instrument in any manner inconsistent with these operating
instructions or under any conditions that exceed the environmental
specifications stated.

This instrument is not user serviceable.  For technical assistance, contact
the sales organization from which you purchased the product.

In order to comply with EU Directive 2002/96/EC on Waste Electrical
and Electronic Equipment (WEEE):  

This product may contain material

which could be hazardous to human health and the environment.  DO NOT
DISPOSE of this product as unsorted municipal waste.  This product
needs to be RECYCLED in accordance with local regulations, contact
your local authorities for more information.  This product may be returnable

to your distributor for recycling - contact the distributor for details.

12

Dimensions:

5.38" (13.67cm) L (including snout) x 2.53" (6.42cm) W
x 2.25" (5.72cm) H  (including knob and feet)

Installation Environment:

Installation Category II

per IEC 664

Pollution Degree Level II

per IEC 61010-1

Temperature:

32 to 104 

°

F (0 to +40 

°

C) operating

14 to 158 

°

F (-10 to +70 

°

C) storage

Humidity:

Maximum relative humidity of 80% for temperatures
up to 88 °F (31 °C) decreasing linearly to 50% relative
humidity at 104 °F (40 °C)

Specifications subject to change without notice.

Dimensions in Inches [mm]

www.calcert.com

[email protected]

1.800.544.2843

0

5

10

15

20

25

30

Summary of Contents for 6180-012

















Reviews: