Monacor JTS 25.7300 Instruction Manual Download Page 10

10

English

Strain relief for the cable from the power 
supply unit

Power supply jack to connect the power sup-
ply unit provided

10 

Audio output (6 3 mm jack, unbalanced) with 
line level

11 

Audio output (XLR, balanced) with line level 
or, with activated level attenuation, with mi-
crophone level

12 

BNC jacks for the two antennas (1) provided 

2  Safety Notes

The units (receiver and power supply unit) cor-
respond to all relevant directives of the EU and 
are therefore marked with   

WARNING

The power supply unit uses dan-
gerous mains voltage  Leave ser-
vicing to skilled personnel only; 
inexpert handling may result in 
electric shock 

• 

The units are suitable for indoor use only  Pro-
tect them against dripping water and splash 
water, high air humidity and very high or low 
temperatures (admissible ambient tempera-
ture range: 0 – 40 °C) 

• 

Immediately disconnect the power supply unit 
from the socket

1  if the receiver or the power supply unit is 

visibly damaged, 

2  if a defect might have occurred after the unit 

was dropped or suffered a similar accident,

3  if malfunctions occur 
In any case the units must be repaired by skilled 
personnel 

• 

For cleaning only use a dry, soft cloth; never 
use water or chemicals 

• 

No guarantee claims for the units and no liability 
for any resulting personal damage or material 
damage will be accepted if the units are used 
for other purposes than originally intended, if 
they are not correctly connected or operated, or 
if they are not repaired in an expert way 

If the units are to be put out of operation 
definitively, take them to a local recycling 
plant for a disposal which is not harmful 
to the environment 

3  Applications

Combined with a matching transmitter from JTS 
(wireless microphone MH-36G2 /5 or pocket 
transmitter PT-36BG2 /5 with a microphone con-
nected), this receiver creates a wireless audio 
transmission system which is ideally suited for 
professional stage applications  The system uses 
the UHF frequency range 506 – 542 MHz 

The receiver uses “True Diversity” technology: 

The signal sent from the transmitter is received by 
two antennas and amplified in two separate re-
ceiver sections  The signal of the highest quality is 
then processed  The transmission range depends 
on local conditions; in open-field conditions, the 
minimum range is 100 m 

3.1  Conformity and approval

Herewith, MONACOR INTERNATIONAL declare 
that the receiver US-36G2 /5 complies with the 
directive 2014/53/EU  The EU declaration of 
conformity is available on the Internet:
www jts-germany de or www monacor com
The receiver may be operated in the following 
countries:
DE
Prior to operating the wireless transmission system 
outside Germany, please contact the MONACOR 
subsidiary or the corresponding authorities of 
the respective country  Links to the national au-
thorities can be found via the following Internet 
address:
www cept org

 ECC

 Topics/Info

  SRD* Regulations and indicative list of equip-

ment sub-classes

 EFIS and National Frequency Tables

* Short Range Devices

4  Connection

1) Insert the antennas (1) provided into the an-

tenna jacks (12) and put them in a vertical 
position 

Hint:

 To increase the range and the interference 

resistance, use antenna amplifiers from JTS (e  g  
UB-900B)  The amplifiers are supplied with power 
via the antenna jacks of the receiver 

Summary of Contents for JTS 25.7300

























Reviews: