Monaco HOLIDAY RAMBLER 2013 Owner'S Manual Download Page 81

Page: 81 / 142

APPLIA

nCES

- 4

2013 HOLIDAY RAMBLER

Remove and clean filters and housing

with mild soap and water. Do not use

harsh cleaners, scouring powders or

petroleum based cleaners as this can

damage the filters and housing finish.

Energy Saving Tips:

1. Select a temperature setting that suits

comfort needs.

2. Regularly clean return air filters.

3. Park in a shaded area during extreme

outdoor temperatures. Keep windows

and doors closed. Keep blinds or

shades closed. Avoid use of heat

producing appliances.

AIR cONDITIONER - FREE BLOW

The roof air conditioner operates from 120

Volts AC from shore power. Operating controls

are on the air conditioner.

INFORMATION:

For detailed information and

operating instructions refer to air

conditioner OEM manual.

Operation

Thermostat:

Controls temperature

setting. Set thermostat to desired

temperature level.

On/Off:

Switch turns on sweep motion

of louvers. Turn switch off to manually

set louvers to desired position

Off Position:

Turns unit off.

Fan Operation:

This will circulate

the air in the trailer without cooling

or heating. Select a comfortable fan

speed.



Cool Operation:

Turns fan and

compressor on.

Select fan speed low

or high.

Open vent (B) for

direct discharge

NOTE:

The blower runs

continuously to

circulate air and

maintain an even

temperature. The

compressor will

come on as soon

as cooling is required to maintain the

selected temperature level.

CAUTION:

Wait 2 minutes when shutting down

and restarting the air conditioner

with either the selector switch or

thermostat. This allows refrigerant

pressure to equalize and compressor to

easily restart.

Maintenance

Periodically remove and clean return

air filter. Filter is located above

removable panel in air box .Wash

filters with soap and warm water and to

air dry. Do not operate without filter.

Remove and clean air box housing with

mild detergent. Do not use furniture

polish or scouring powders.



Energy Saving Tips:

1. Select the temperature setting that

suits comfort needs and leave it at

that setting.

2. Keep return air filter clean.

3. During extreme outdoor temperatures,

park the trailer in a shaded area, keep

the windows and doors closed. Avoid

the use of heat producing appliances

and use window shades, blinds or

curtains.

Free Blow A/C Controls

031063f

Air V

031063g

A =- Return Air Filters

B = Direct Disharge

Summary of Contents for HOLIDAY RAMBLER 2013















































































































































Search results

Summary of Contents for HOLIDAY RAMBLER 2013

Reviews:

Related manuals for HOLIDAY RAMBLER 2013

Brands by name

Popular brands

Monaco HOLIDAY RAMBLER 2013, Owner'S Manual

Search results

Summary of Contents for HOLIDAY RAMBLER 2013

Reviews:

Related manuals for HOLIDAY RAMBLER 2013

Brands by name

Popular brands