4.6.2 Charging an installed EnergyPak
CAUTION:
• Always take care to align all connectors properly before connecting.
• Make sure the bike is steady and standing firmly.
• Do not sit on the bike, move the bike or rotate the cranks while the charger is
connected to the bike.
Procedure
To start charging:
• Pull and rotate the charge-port cover
clockwise;
• Connect the charger to the charge-port
on the bike;
• Connect the charger to an AC outlet;
To activate 60% charge mode (optional):
• Press the 60% charge mode indicator/
button.
To stop charging:
• Disconnect the charger from the AC
outlet;
• Disconnect the charger from the
EnergyPak.
• Put the charge-port cover back in place;
INFO:
• The LEDs on the Smart charger show the process status.
• The led indicator on the EnergyPak shows current energy level.
• Charging can be stopped/interrupted at any time.
• It is recommended to keep the system switched off during charging.
Bike usage
23
