Step 4: Insertion of AUX-IN and SPK-OUT cabling (only if necessary)
1)
Connect connectors (male plug with female plug)
2)
Insert connected connectors into the secondary arrestment
(pos.no.7)
3)
By closing of secondary arrestment the connection is secured
against its unwanted disconnection
Step 5: Installation of the plastic frame of the monitor
1)
Tilt the monitor into 45° ~ 60° angle
2)
Insert the plastic frame (pos.no.2) on the tipping monitor
(pos.no.1) with the holder (pos.no.6)
Figure 5 - AUX-IN and SPK-OUT cabling
connection
Figure 6 – Insert monitor with hinge into the frame
Date 27/07/2011 Page 4 / 5
NM_FMS5723_002_27072011_EN