3.
Installation procedure
Step 1: Insert metal holder of the monitor into the seat (pos.no.6) and fix it
with 3 screws M5 x 10mm (pos.no.3) trough holes marked with
rings.
Step 2: Installation of the monitor cabling:
1)
Connect the cabling (pos.no.5) (FMS-CA04-........) into the
monitor connector
2)
Insert the cabling (pos.no.5) into the groove on the rear side of
the monitor
3)
Apply the adhesive tape to avoid that the cabling fall out from
the groove
Figure 2 – monitor cabling
Figure 1 – Fixation of the hinge on the seat with screws
3
2
1
Date 27/07/2011 Page 2 / 5
NM_FMS5723_002_27072011_EN