Version 2.1
NU_CTS100_001_12112010_EN
7
CTS-100 Installation guide (Project one: vehicle doors with gasket)
CTS100 Installation guide (Project two: vehicle doors without gasket)
CTS100 Installation guide (Project one: vehicle doors with gasket)
a) Drill adequate screw hole for
holder and magnetic pillar.
b) Fix holder and magnetic pillar in
appropriate position.
c) Please see the following picture, when
install the CTS100, please put one side of
it on the holder, then turn it to make the
whole undersite flat with the holder, when
disassembly, please take it down on the
opposite way.
d) Done
