Molift Quick Raiser 205 User Manual Download Page 4

3

Molift QuickRaiser 205 

Product label / GS1-128

The barcode label contain EAN number, 

serial number and production date.

QuickRaiser 205

Art. no.

Gross weight: 

249kg / 549lbs

SWL 205kg / 452lbs

24VDC 7A, IP24

Duty cycle 10% 

2 min. on /18 min. off

Etac AS 

Etac Supply Gjøvik

Hadelandsveien 2

NO-2816 Gjøvik NORWAY

Warning labels and Symbols

Symbols used on the product, explained in more 

detail:

Type BF applied part

CE marked

Refer to user manual

Indoor Use only

Do not dispose in general waste

Emergency lowering

Service indicator

Battery indicator

Charging indicator

Double isolation symbol

Product identification

General

Declaration of conformity

The Molift Quick Raiser 205 and related accessories described in this operator manual 

are CE marked in accordance with EU Council Directive 93/42/EEC concerning medical 

devices, class 1, and has been tested and approved by a third party according to 

standards IEC 60601-1, IEC 60601-1-2 and NS-EN ISO 10535:2006.

Conditions for Use

Lift and transfer of a person will always pose a certain risk and only trained personnel are allowed to use 

the equipment and accessories covered by this user manual.

Modifications and use of components made by other manufacturers.

We recommend only using Etac Molift components and spare parts. Declaration of conformity is not 

valid and Etac is not responsible for warranty if any modifications are made to the product. Etac shall not 

be liable for faults or accidents that can occur when using components made by other manufacturers.

Only certified personnel are allowed to open lifter or accessories to perform service 

or repair. Risk of injury from rotating parts and electric shock.

The lifter shall not be operated by the person being lifted.

Warranty

2-year warranty against defects in workmanship and materials of our products.

For Terms and conditions.

Summary of Contents for Quick Raiser 205





















Reviews: