INSTALLATION INSTRUCTIONS
Shielded DataGate Jack
Doc. # AS-18700-002, Rev C
Form # 315-234
Rev. Date: July 2008
SAP # 187000294
Molex Premise Networks
Corporate Headquarters
Tel: 1 866 733 6659
www.molexpn.com
European
Headquarters
Tel: 44 (0) 1489 572111
www.molexpn.co.uk
Pac Rim
Headquarters
Tel: 61 3 9971 7111
www.molexpn.com.au
Molex
Incorporated
Tel: 630 969 4550
www.molex.com
MOLEX PREMISE NETWORKS
This information is correct as at the time of publication, specifications are subject to change.
4d. Wiring
Map.
4e.
Terminate cable ensuring that enough twisted braid is available to make contact
when the rear can is fitted.
Untwist -
Max 6mm
4f.
Ensure cables are trimmed off flush with IDC, if not use side cutters to remove excess
cable after termination.
4.
Preparation and termination (S/FTP)
4a.
Slide plastic cable clamp and rear can on to cable.
4b
Remove 100mm of cable sheath.
4c.
Remove foil from pairs of cable. Twist braid and wrap around the cable sheath
4
TERMINATED WITH S/FTP CABLE
