RHT-5770 Hand Crimp Tool
Doc No. 64001-3200 Release Date: 11-11-03
UNCONTROLLED COPY
Page 8 of 8
Revision: B
Revision Date: 05-24-04
Certificate of Calibration
Tool Order Number ____________________________
Tool Eng. Number_____________________________
Tool Revision________________________________
Serial Number_______________________________
Date of Manufacture___________________________
Handle Load Range at 1 inch from the Tips =_______________
Actual =_______________
Pin Gage of Conductor Nest/Nests or Slug height if the nest is the “F” Crimp style.
Range Conductor Nest # 1 =______________Actual =_____________
Range Conductor Nest # 2 =______________Actual =_____________
Range Conductor Nest # 3 =______________Actual =_____________
Technician________________________
Date of Calibration ___________________
Calibration should be done every 5,000 cycles or 3 months.
Tools should be lubricated during this operation.
Molex Application Tooling Group
1150 E. Diehl Road
Naperville, IL 60563
TEL:(630) 969-4550;
FAX:(630) 505-0049