RHT-5770 Hand Crimp Tool
Doc No. 64001-3200 Release Date: 11-11-03
UNCONTROLLED COPY
Page 2 of 8
Revision: B
Revision Date: 05-24-04
WIRE
TERMINAL
Figure 2
Figure 3
TERMINAL
BARREL
CONDUCTOR
ANVIL
TERMINAL
CONDUCTOR
PUNCH
LOCATOR
WIRE
Wire Size: 10 – 12 AWG 5.00 – 3.00 mm²
Wire Strip Length Insul. Dia. Max.
Terminal No. Terminal Eng No. (REF)
In. mm In. mm
19040-0003 19040-0003 .300
7.60
.280
7.11
19164-0056 SC-12-10 .375
9.53
.280
7.11
19164-0058 SC-201-12 .438
11.12
.310
7.87
19164-0060 SC-228-04 .438
11.12
.310
7.87
19164-0061 SC-228-06 .438
11.12
.310
7.87
19164-0062 SC-228-08 .438
11.12
.310
7.87
Wire Size: 10 – 12 AWG 5.00 – 3.00 mm²
Wire Strip Length Insul. Dia. Max.
Terminal No. Terminal Eng No. (REF)
In. mm In. mm
19164-0065 SC-230-10 .438
11.12
.310
7.87
19164-0066 SC-230-14 .438
11.12
.310
7.87
19164-0067 SC-230-56 .438
11.12
.310
7.87
19164-0068 SC-240-38 .438
11.12
.310
7.87
19164-0069 SC-241-06 .438
11.12
.310
7.87
19164-0070 SC-241-08 .438
11.12
.310
7.87
19164-0072 SC-268-10 .438
11.12
.310
7.87
19164-0073 SC-268-14 .438
11.12
.310
7.87
19164-0074 SC-2YCX .438
11.12
.310
7.87
OPERATION
Open the tool by first closing the jaws sufficiently for the ratchet mechanism
to release.
Crimping Terminals
1. Push up on the locator blade and position the terminal with the barrel
facing up into the color-coded nest, centering the barrel in the lower jaw
as shown in Figure 1. Release the locator blade to hold the terminal in
position.
Note: The locator is used to hold the terminal, not to position the terminal.
2. Partially close the hand tool jaws until the connector is held snug in place. See Figure 2.
3. Insert the properly stripped wire into the terminal barrel (See Figure 2 and 3).
4. Complete the crimp by closing the hand tool handles until they release.
Note: The tamper proof ratchet action will not release the tool until it has been fully closed.
5. Lift the locator blade and remove the crimped terminal. Inspect for proper crimp location, and check for
insulation closure. Locator is adjustable up and down to keep terminals straight after crimping. Molex offers
a Crimp Inspection Handbook for closed barrel industrial product. See our website or contact your sales
engineer.
TERMINAL
JAWS OPEN
Figure 1
LOCATOR
PUSH UP