RHT2251 Hand Crimp Tool
Doc No. 64001-4800 Release Date: 10-07-04
UNCONTROLLED COPY
Page 7 of 7
Revision: A
Revision Date: 10-07-04
Certificate of Calibration
Tool Order Number __________________
Tool Eng. Number
___________________
Tool Revision ___________________
Serial Number ___________________
Date of Manufacture__________________
Handle Load Range at 1 inch from the Tips =______________
Actual =_____________
Pin Gauge of Conductor Nest/Nests or Slug height if the nest is the “F” Crimp style.
Range Conductor Nest # 1 = ____________-- Actual = ______________
Range Conductor Nest # 2 = __N/A_______-- Actual = ______________
Range Conductor Nest # 3 = __N/A_______-- Actual = ______________
Technician ______________
Date of Calibration ______________
Calibration should be done every 5,000 cycles or 3 months.
Tools should be lubricated during this operation.
Molex Application Tooling Group
1150 E. Diehl Road
Naperville, IL 60563
Tel: (630) 969-4550;
Fax: (630) 505-0049