EC/ECM NO:
108434
SAP NO :
187000366
Doc No:
AS-18700-101
Doc part:
AS
REV-
A1
MPN/FMT-042 (2016/07/01 REV-00). SHEET No.
4
of
4
Installing Fiber Adapter Plates (Fig. 6)
Up to four Fiber adapter plates can be installed in the enclosure.
Adapter plates utilize corner retention push pins when pulled upon two corner fasteners.
Position the Fiber adapter plate in the appropriate location within the enclosure and push
the two corner fasteners gently back until they will go no further.
o
Installing Mod Link Cassettes
Up to four Mod link cassettes may be installed in the enclosure.
Mod link cassettes utilize corner retention push pins which when pulled upon open two
corner fasteners.
Position the Mod link cassettes in the appropriate location within the enclosure and push
the two corner fasteners gently back until they will go no further
Splice Cassette installation also will follow the same procedure as Mod Link Cassette.
Fig. 6
WARNING:
Dust caps should be left intact on all adapters not in use.
Never look into an open adapter as laser light may be present and is invisible. Serious eye
damage is possible.
