AT2050 Air Crimp Head Tool
Doc. No. 64005-1200
Release Date: 10-17-02
UNCONTROLLED COPY
Page 8 of 8
Revision: C
Revision Date: 08-05-03
Certificate of Calibration
Tool Order Number __________________
Tool Eng. Number___________________
Tool Revision______________________
Serial Number_____________________
Date of Manufacture
Pin Gauge of Conductor Nest/Nests or Slug height if the nest is the “F” Crimp style.
Range Conductor Nest # 1 = ____________- Actual = ___________
Range Conductor Nest # 2 = ____________- Actual = ____________
Range Conductor Nest # 3 = ____________- Actual = ____________
Technician _______________________
Date of Calibration __________________
Calibration should be done every 5,000 cycles or 3 months.
Tools should be lubricated during this operation.
Molex Application Tooling Group
1150 E. Diehl Road
Naperville, IL 60563
Tel: (630) 969-4550
Fax: (630) 505-0049
