Extractor Tool for Crimp Terminals
Doc No: ATS-638132700
Release Date: 11-07-07
UNCONTROLLED COPY
Page 6 of 7
Revision M
Revision Date: 09-01-09
Figure 14
EXTRACTOR
TOOL
WIRE
TERMINAL
HOUSING LOCK
HOUSING LOCK
PUSHED DOWN
Figure 15
EXTRACTOR
TOOL
TERMINAL
WIRE
CONNECTOR
HOUSING TAB
Figure 13
EXTRACTOR
TOOL
WIRE
CONNECTOR
HOUSING TAB
Figure 16
EXTRACTOR
TOOL
WIRE
For 50351 Terminal Series:
1.
Insert the Extractor Tool into the slot on the bottom of the connector
housing.
2.
Gently lift up on the housing tab, and push the terminal back through
the connector slot. While pulling the terminated wire out in the
direction of the arrow. See Figure 13.
For 56086, 56134, 56187, 57964, and 59370 Terminal Series:
1.
Push the terminal forward in the arrow direction before using the Extractor Tool. Insert the Extractor Tool into
the slot on the side of the connector housing as shown in Figure 14.
2.
While depressing the housing lock, push the terminal back through the
connector slot and pull the terminated wire out in the arrow direction. See
Figure 15.
3.
When using certain housings it may be necessary to insert the Extractor Tool
into the slot on the bottom of the connector housing.
4.
Gently lift up on the housing tab, and push the terminal back through the
connector slot. While pulling the terminated wire out in the direction of the
arrow. See Figure 16.
CAUTION
: Do not reuse the 51242, 51353, and 51382 housings series once the terminals are extracted.
