LANGUAGE
ENGLISH
JAPANESE
REVISE ON PC ONLY
TITLE:
PicoBlade 1.25 DIP TYPE & SMT TYPE
APPLICATION SPECIFICATION
A
SEE SHEET 1 OF 58
THIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC
TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
REV.
DESCRIPTION
DOCUMENT NUMBER
510210000-AS
DOC. TYPE
PS
DOC. PART
000
CUSTOMER
GENERAL
SHEET
19 OF 58
EN-127(2015-12)
APPLICATION SPECIFICATION
※
If terminal is inserted incompletely, terminal lance is not locked with mold lance and terminal is not retained.
※
In the case of incomplete insertion (see Fig.6-6), mold lance is deformed. Mold lance kept in such condition
is deformed and not go back to correct position, and retention force may decrease even if terminal is
re-inserted in to housing. In this case, please replace housing to new one.
6. When checking harness after processing, please avoid bending wire excessively or with tension.
That might cause contact failure because force was added to terminal crimping part or receptacle
housing lance part.
7. When having a conduction check, do not attach anything besides applicable mating connector.
That might cause contact failure because of transformation of terminal etc.
Instruction