0112-0126 B
53
Appendix B: Accessories
Part Number
Description
0200-6117
SpectraTest ABS1 Absorbance Validation Test Plate
9000-0161
Cuvette Absorbance Validation Kit
R8024
SpectraPlate-Quartz UV-transparent microplate
4400-0002
Power Cord (US, Canada, Japan, Mexico, India)
4400-0036
Power Cord, EC1 (Germany, France, Scandinavia, Italy, Korea)
4400-0037
Power Cord, EC2 (UK, Indonesia, Singapore, Malaysia)
4400-0038
Power Cord, AP1 (Australia, Hong Kong, China)
5064264
ABS Reader instrument dust cover
Available Accessories
Cuvettes
The following cuvettes have been tested with the instrument. All have an optical pathlength
of 1 cm (10 mm) and standard external dimensions (12.5 cm x12.5 cm). Their fill volumes
differ only because of their different internal width and chamber height dimensions.
Standard and Semi-micro Cuvettes
Several brands available.
Internal Width
Minimum Volume
Maximum Volume
10 mm
~ 1.8 mL
4.0 mL
4 mm
~ 0.75 mL
1.4 mL
2 mm
~ 0.40 mL
0.7 mL
Ultra-micro Cuvettes (Hellma)
When ordering, specify the Z-dimension to be 15 mm.
Hellma Cat. No. Window Size
Chamber Volume
Fill Volume
105.201-QS
2.0 x 5.0 mm
100 μL
120 μL
105.202-QS
a
2.0 x 2.5 mm
50 μL
70 μL
105.210-QS
b
0.8 mm diameter
5 μL
10 μL
a. You must put a riser (0.8–1 mm) on cuvette bottom to match the cuvette window to
the beam. 2.0 x 2.5 mm 50 μL 70 μL 105.210-QSb
b. You must put a riser (0.8–1 mm) on cuvette bottom to match the cuvette window to
the beam. Gives good qualitative results (i.e. spectral scans), but quantitative
results are impractical because the window is smaller than the beam.
B
