Molecular Devices MultiWash+, User Manual

Page: 56 / 152

Mi Microplate Washer User Guide
56 5032022 C
Select the Cycles for the Procedure
The procedure definition must have at least one cycle selected, and can have up to eight
cycles. If you have not defined the cycles to use with this procedure, you must do so before
you can continue with the procedure definition. See
Defining a Wash or Rinse Cycle on page
65 .
Figure 5-6: The Cycle1 prompt
Button Action
On the left
Press this button to return to the previous step. See Select the Bottle for the
Procedure on page 55 .
On the right
Press this button to end the process and return to Define Procedure without saving
any changes. See Defining a Procedure on page 51 .
Press this button to scroll forward through the list of previously defined cycles.
Press this button to scroll backward through the list of previously defined cycles.
Press this button to confirm the cycle selection and then select the next cycle to use
with the procedure. See
Add More Cycles to the Procedure on page 57 .
Table 5-5: Actions of Control Panel Buttons