Molecular Devices MultiWash+, User Manual

Page: 57 / 152

Chapter 5: Defining a Procedure
5032022 C 57
Add More Cycles to the Procedure
The procedure definition can have up to eight cycles. When you have finished adding cycles,
select
- - - as the name of the next cycle to stop adding cycles to the procedure definition.
Figure 5-7: The Cycle2 prompt
Button Action
On the left
Press this button to return to the previous step. See Select the Cycles for the
Procedure on page 56 .
On the right
Press this button to end the process and return to Define Procedure without saving
any changes. See Defining a Procedure on page 51 .
Press this button to scroll forward through the list of previously defined cycles. When
you have finished adding cycles, select
- - - to stop adding cycles to the procedure
definition.
Press this button to scroll backward through the list of previously defined cycles.
When you have finished adding cycles, select
- - - to stop adding cycles to the
procedure definition.
Press this button to confirm the cycle selection and then select the next cycle to use
with the procedure. If you selected
- - - , then you can define the duration of the final
aspiration. See Select the Duration of the Final Aspiration for the Procedure on page
58
Table 5-6: Actions of Control Panel Buttons