2021 Mold-Masters. All Rights Reserved.
M2P--QG--EN--00--03-1
QUICK GUIDE FOR TEMPMASTER™
M2 PLUS CONTROLLER
Refer to the M2P Controller User Manual for full instructions and safety information
.
CREATE A NEW TOOL
1. Choose [
ToolStore
].
2. Choose an empty tool slot then choose [
Detect
].
3. Enter password if required.
4. Enter tool name.
CONFIGURE CONTROL CARDS
1. Choose [
Settings
].
2. Choose a zone from the Type column.
3. Choose [
Set
].
4. Choose zone type.
5. Change header color if required.
6. Choose [
OK
] to accept the changes or [
Cancel
] to return to the
Settings screen without saving any changes.
NOTE
: all temperature control cards initally default to probe zones and
use probe default values.
CONFIGURE TOOL PARAMETERS ZONE BY ZONE
1. Choose [
Settings
].
2.
Choose the zone or zones to be configured and choose the
column of the required parameter.
3. Choose [
Set
] and enter password if required.
4. Set the required value.
5. Repeat steps 2 through 5 for each parameter that requires
adjustment.
NOTE
: see user manual for a list and descriptions of tool parameters.
CONFIGURE TOOL / SYSTEM SETTINGS
1. Choose [
Settings
] and then choose [
Config
].
2. Enter password if required.
3. Choose [
Tool Config
] from Tool Settings or [
System Config
] from
System Settings.
4. Choose the required setting and enter the required value or
option.
5. Choose [
OK
] to accept the value or choose [
Back
] to return to the
Tool or System Config screen without saving.
IMPORTANT:
to save any setting change permanently, the user must
save it to the ToolStore.
CONFIGURE THE CONTROLLER
MAIN SCREENS AND MENUS
MAIN SCREENS AND MENUS
CONFIGURE THE CONTROLLER
CREATE A NEW TOOL
CONFIGURE CONTROL CARDS
CONFIGURE TOOL PARAMETERS ZONE BY ZONE
CONFIGURE TOOL AND SYSTEM SETTINGS
SAVE A TOOL / SETTINGS TO THE TOOLSTORE
SET ZONE TEMPERATURE
SETUP EASYVIEW SCREEN
OPERATE THE CONTROLLER
STARTUP PROCEDURE
LOAD TOOL SETTINGS
CHANGE MODES - INDIVIDUAL ZONES
CHANGE MODES - MULTIPLE ZONES
CHECK ZONE PERFORMANCE
SHUTDOWN PROCEDURE
GLOBAL SUPPORT
Display Screen
Functions:
Monitor and Information:
observe zone condition
Control
:
side command buttons
change from page to page
Navigation:
tabs allow the user to
switch between the different pages
ToolStore Screen
Description:
List of tools with names and saved
settings.
Apps Screen
Gives access to other pages:
•
Testing
•
Export
•
Pictures
•
Actions
•
Alarms
•
Remote
•
Energy
•
Purge Wizard
•
Smart Mold
Settings Screen
Description:
Gives access to tool and system
settings.
Graph Screen
Description:
Displays graphs of temperature
or power versus time for up to 20
zones.
