Mold-Masters Fusion G2, User Manual

Page: 63 / 192

14. Install the cylinder top seal. See Figure 4-22.
Figure 4-22 Anti rotation version: install the top seal
15. Install the cylinder top onto the cylinder body with the dowel in the piston
aligned with the anti rotation slot.
NOTE
Ensure the ports are on the same face. See Figure 4-23.
Figure 4-23 Anti rotation version: assembled cylinder
16. Apply anti-seize compound to the screws.
17. Install the cylinder top screws.
18. Torque to 16 Nm (11.8 ft-lbs).
4-32
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
PREPARATION
FSG2 User Manual