6.8.4 Setting Analog Triggers
1. Choose a trigger from the Trigger drop-down menu.
NOTE
The threshold is the position at which the motion step is activated. The
maximum value for a threshold is the stroke entered during analog
calibration. See “6.8.3 Calibrating Analog Inputs” on page 6-22 for more
information.
2. Set a threshold value.
The timing of an open or close trigger can be set to Rising edge or Falling
edge.
Rising edge: Triggers when the rising edge of the digital or analog
input occurs.
Falling edge: Triggers when the falling edge of the digital or analog
input occurs.
NOTE
The Time Only option is also available for stages other than stage 1.
6-24
E-Drive Controller User Manual
OPERATION
© 2021 Mold-Masters (2007) Limited. All Rights Reserved.
