www.mokosmart.com
14
2.6 OTA
The gateway has the ability to update firmware over the air. After filling in the OTA information,
click the “Start Update” button, the gateway will enter the update process.
During OTA process, LED will flash yellow, if OTA succeed, LED turns solid green, if failed, LED turns
solid red.
Note: The OTA server (
47.104.172.169:8080
) in the above picture is just available for your test.
MOKO can also provide the update file, you can build your own OTA server to operate it.
2.7 Reboot Device
The “Reboot Device” button is used to send a reboot command to the device. After that, the
gateway will reboot once.
2.8 Reset Device
The “Reset Device” button is used to send a reset command to the device. After that, the device
will restore to factory setting, and the indicator will flash blue and green once.
You can also press and hold the reset button for 10 seconds to reset it.
