LW005-MP
9 www.mokosmart.com
6.2 Connect to LoRaWAN network server
To join LW005-MP into LoRa network to communicate with LoRa gateway. The network operation
is as following:
(1) If LW005-MP had never joined any network:
First
, turn on the device.
Second
, use MKLoRa APP to connect the device then get required ID and Keys.
Default join ID and Keys as following:
DevEUI: BLE MAC+ FFFF, example:MAC:112233445566 DevEUI:112233FFFF445566
AppEUI: 70b3d57ed0026b87
AppKey: 2b7e151628aed2a6abf7158809cf4f3c
DevAddr: The last four bytes of BLE MAC address
AppSKey: 2b7e151628aed2a6abf7158809cf4f3c
NwkSkey: 2b7e151628aed2a6abf7158809cf4f3c
Third
, register the device on LoRa network server.
Forth
, click save button on MKLoRa APP to send a join request to LoRa server, it will search
an available LoRa network to join.
Note:
About MKLoRa APP details, please check the instructions in LW005-MP APP guide.
6.3 ON/OFF Monitoring & Control
There are three ways to control the AC output of the plug:
⚫
Through the physical button, click the button once to switch the ON/OFF state.
⚫
Through the MKLoRa APP.
⚫
Through LoRaWAN downlink command.
The device will regularly report
Switch Payload
for ON/OFF monitoring after connect to LoRaWAN
network server successfully. In addition, whenever the ON/OFF state is switched, the device will
also report
Switch Payload
.
6.4 Timer Control
After LW005-MP is successfully connected to the LoRaWAN network server, user can set a timer to
LW005-MP through the MKLoRa APP/LoRaWAN downlink command.
When the timer is complete, the plug will automatically change the switch state. During the timer
process, the device will regularly report
Countdown Payload
, which contains the remaining time of
the timer process.
6.5 Electrical Monitoring
The plug can measure the instant voltage, current and frequency of the connected load, and the
measuring accuracy can reach ±0.5%.