MOKENEYE PW01Z, Owner'S Manual

Page: 5 / 14

5
NOTICE: Equipment and/or property damage may
result if these instructions are not followed.
The operation of any power tools
can result in foreign objects being
thrown into your eyes, which can result in severe
eye damage. Before beginning power tool
operation, always wear safety goggles or safety
glasses with side shields and a full-face shield when
needed. We recommend a Wide Vision Safety Mask
for use over eyeglasses or standard safety glasses
with side shields. Always use eye protection which
is marked to comply with ANSI Z87.1
SYMBOLS (CONTINUED)
IMPORTANT: Some of the following symbols may
be used on your tool. Please study them and learn
their meaning. Proper interpretation of these
symbols will allow you to operate the tool better
and more safely.
Symbol
Designation/Explanation
V Volts
A Amperes
Hz Hertz
W Watt
kg Kilograms
min Minutes
s Seconds
Wh Watt-hours
Ah Ampere-Hours
Ø Diameter
n
0
No-load speed
n Rated speed
…/min
Revolutions or
reciprocations per minute
0 Off position
1,2,3, …
I, II, III,
Selector settings
Infinitely variable selector with
off
Arrow
Direct current
Class II tool
Li-ion RBRC seal
Read manual symbol
Wear eye protection symbol
SYMBOLS (CERTIFICATION
INFORMATION)
IMPORTANT: Some of the following symbols for
certification information may be used on your tool.
Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to
operate the tool better and more safely.
Symbol Designation/Explanation
This symbol designates
that this tool is listed by
Underwriters
Laboratories.
This symbol designates
that this tool is recognized
by Underwriters
Laboratories.
This symbol designates
that this tool is listed by
Underwriters
Laboratories, to United
States and Canadian
Standards.
This symbol designates
that this tool is listed by
the Canadian Standards
Association.
This symbol designates
that this tool is listed by
the Canadian Standards
Association, to United
States and Canadian
Standards.
This symbol designates
that this tool is listed by
the Intertek Testing
Services, to United States
and Canadian Standards.
This symbol designates
that this tool complies to
NOM Mexican Standards.