6
Water Fill
WARNING
: To reduce the risk of fire or shock
hazard, do not pour or spill water into control
or motor area.
If controls get wet, let them dry completely
and have unit checked by authorized service
personnel before plugging in.
WARNING:
To reduce the risk of shock,
always unplug humidifier before cleaning or
servicing.
Electrical Hook-Up
Locate nearest 120V A.C. wall socket in the
location desired, preferably on inside wall. With
the humidifier in the desired location, route the
electrical cord safely so no one will trip or upset
the humidifier. Plug in the electrical cord.
To reduce the risk of electrical shock, this
humidifier has a polarized plug (one blade is wider
than the other). This plug will fit in a polarized
outlet only one way.
WARNING
: To reduce the risk of fire
or shock hazard, humidifier should
be plugged into a 120V A.C. outlet.
Do not use extension cords.
If the plug does not fit fully in the outlet, reverse
plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not
change the plug in any way.
This humidifier is designed for use with the two
water bottles that are located under the pivoting
lid.
Open the pivoting lid of the humidifier. Remove the
water bottles by lifting them straight up and out of
the cabinet.
Notice the water bottles are designed as right and
left hand units. Position them in the correct
location so the humidifier can function properly.
The water bottles should rest in the front of the
cabinet. Each “Side-Fill Cap” must be facing the
rear of the unit.
QUARKSP6647 HD14070:SP6647 .qxd 12/10/2009 3:39 PM Page 6