Mohawk RJ-50-AH Series, Installation, Operation, Maintenance, Parts

Page: 7 / 34

MOHAWK MODEL RJ-50-AH-SERIES
2
IMPORTANT NOTES FOR MOHAWK LIFT DEVICES
RECOMMENDATIONS BY THE INDIVIDUAL USER OR USING
ORGANIZATION FOR IMPROVING THIS PUBLICATION OR ANY
ASPECT OF THE PRODUCT ARE ENCOURAGED AND SHOULD BE
FORWARDED IN WRITING TO:
MOHAWK RESOURCES LTD.
PRODUCT IMPROVEMENTS
65 VROOMAN AVE.
AMSTERDAM, NY, 12010
THIS IS NOT A VEHICLE LIFTING PROCEDURE MANUAL AND NO
ATTEMPT IS MADE OR IMPLIED HEREIN TO INSTRUCT THE USER
IN LIFTING METHODS PARTICULARLY TO THE INDIVIDUAL
APPLICATION OF THE EQUIPMENT DESCRIBED IN THIS MANUAL.
RATHER, THE CONTENTS OF THIS MANUAL ARE INTENDED AS A
BASE LINE FOR OPERATION, MAINTENANCE, TROUBLE
SHOOTING, AND PARTS LISTING OF THE UNIT AS IT STANDS
ALONE AND AS IT IS INTENDED AND ANTICIPATED TO BE USED
IN CONJUNCTION WITH OTHER EQUIPMENT.
PROPER APPLICATION OF THE EQUIPMENT DESCRIBED HEREIN
IS LIMITED TO THE PARAMETERS DETAILED IN THE
SPECIFICATIONS AND THE USES SET FORTH IN THE
DESCRIPTIVE PASSAGES. ANY OTHER PROPOSED APPLICATION
OF THIS EQUIPMENT SHOULD BE DOCUMENTED AND
SUBMITTED IN WRITING TO MOHAWK RESOURCES LTD. FOR
EXAMINATION. THE USER ASSUMES FULL RESPONSIBILITY FOR
ANY EQUIPMENT DAMAGE, PERSONAL INJURY, OR ALTERATION
OF THE EQUIPMENT DESCRIBED IN THIS MANUAL OR ANY
SUBSEQUENT DAMAGES.
DO NOT WELD, APPLY HEAT, OR MODIFY THIS EQUIPMENT IN ANY
MANNER WITHOUT WRITTEN AUTHORIZATION FROM
MOHAWK
RESOURCES LTD.
CERTAIN ALLOY OR HEAT-TREATED
COMPONENTS MAY BE DISTORTED OR WEAKENED, RESULTING IN
AN UNSAFE CONDITION.
MOHAWK RESOURCES LTD.
IS NOT RESPONSIBLE FOR
DISTORTIONS, WHICH RESULT FROM WELDING ON THIS
EQUIPMENT AFTER MANUFACTURING IS COMPLETED.
UNAUTHORIZED WELDING, APPLICATION OF HEAT, OR
MODIFICATION OF THIS EQUIPMENT VOIDS ANY AND / OR ALL
APPLICABLE WARRANTIES COVERING THIS EQUIPMENT.
ALL WARRANTIES APPLICABLE TO THIS EQUIPMENT ARE
CONTINGENT ON STRICT ADHERENCE TO THE MAINTENANCE
SCHEDULES AND PROCEDURES IN THIS MANUAL.
KEEP ALL SHIELDS AND GUARDS IN PLACE. INSURE ALL SAFETY
MECHANISMS ARE OPERABLE. KEEP HANDS, FEET, AND
CLOTHING AWAY FROM POWER-DRIVEN AND MOVING PARTS.
CAUTION
THE EQUIPMENT DESCRIBED IN THIS MANUAL COULD BE
POTENTIALLY DANGEROUS IF IMPROPERLY OR CARELESSLY
OPERATED. FOR THE PROTECTION OF ALL PERSONS AND
EQUIPMENT, ONLY COMPETENTLY TRAINED OPERATORS WHO
ARE CRITICALLY AWARE OF THE PROPER OPERATING
PROCEDURES, POTENTIAL DANGERS, AND SPECIFIC
APPLICATION OF THIS EQUIPMENT SHOULD BE ALLOWED TO
TOUCH THE CONTROLS AT ANY TIME.
SAFE OPERATION OF THIS EQUIPMENT IS DEPENDENT ON USE,
IN COMPLIANCE WITH THE OPERATION PROCEDURES OUTLINED
IN THIS MANUAL ALONG WITH THE MAINTENANCE AND
INSPECTION PROCEDURES WITH CONSIDERATION OF
PREVAILING CONDITIONS.
THE EQUIPMENT DESCRIBED IN THIS MANUAL IS NEITHER
DESIGNED NOR INTENDED FOR ANY APPLICATION ALONE OR IN
CONJUNCTION WITH ANY OTHER EQUIPMENT THAT INVOLVES
THE LIFTING OR MOVING OF
PERSONS.
ALWAYS CONSULT THE VEHICLE LIFTING GUIDE FOR THE
PROPER LIFTING POINTS ON ANY VEHICLE. THESE GUIDES ARE
AVAILABLE FROM THE VEHICLE MANUFACTURERS.
AFTER LIFTING THE VEHICLE TO THE DESIRED HEIGHT,
ALWAYS LOWER THE UNIT ONTO THE MECHANICAL SAFETIES.
THE FORMING OF GOOD OPERATIONAL WORK HABITS WILL
ELIMINATE OVERSIGHTS IN THE USE OF PROVIDED SAFETY
DEVICES.
RJ-50-AH-SERIES JACKING BEAMS:
Only certified RJ-50-AH-Series Jacking Beams are intended for use on certified versions of the Mohawk
Parallelogram Lifts (see list below). Follow load rating of beam dependant on what lift it is on. Use of non-
certified jacking beams on certified lifts will void the certification of the lift.
RJ-50P-Series Jacking Beams for use on the following certified lifts:
Model RJ-50-AH-50000:
Rated 50,000 Lb on 75k Lb Lifts (4 Post)
Model RJ-50-AH-37500-P: Rated 37,500 Lb on 75-100k Lb Lifts (Parallel)
Model RJ-50-AH-35000: Rated 35,000 Lb on 50k Lb Lifts (4 Post)
Model RJ-50-AH-35000-P: Rated 35,000 Lb on 50k Lb Lifts (Parallel)
Model RJ-50-AH-31500-P: Rated 31,500 Lb on 45k Lb Lifts (Parallel)
Model RJ-50-AH-28000-P: Rated 28,000 Lb on 40k Lb Lifts (Parallel)
Model RJ-50-AH-25000-P: Rated 25,000 Lb on 36-38k Lb Lifts (Parallel)
Model RJ-50-AH-24500: Rated 24,500 Lb on 35k Lb Lifts (4-Post)
Model RJ-50-AH-23000: Rated 23,000 Lb on 33k Lb Lifts (4-Post)
Model RJ-50-AH-20000: Rated 20,000 Lb on 30k Lb Lifts (4-Post)
Use of a pair of Jacking Beams is allowable, but the minimum distance between centerline of the beams (cylinders) is
14 ft min.
Loading of the jacking beams or combinations of jacking beams above the rated capacity of the lift itself could result in personal
injury to the operator and/or damage to the lift and/or vehicle. The load rating of any jacking beam or combination of jacking beams
on this unit must not exceed the rated capacity of the lift.