Revision 6/F3501
©
Moffat Ltd, August 2006
E25 Convection Oven
-27-
Two
Screws
Two screws
6.3.17 HINGE COUNTER BRACKETS
1) Remove door (refer 6.3.12).
2) Remove screws from back of oven secur-
ing wrapper to oven.
Figure 6.3.21
3) Turn oven onto its back and remove three
screws at each side securing wrapper,
and two securing insulation panel.
Figure 6.3.22
4) Undo two screws and remove lintel cover.
5) Remove control panel (refer 6.2.1) and
microswitch bracket (refer 6.3.2). Place
inside oven.
6) Remove two screws securing the lintel
support to the oven and remove.
Two screws
Figure 6.3.24
9) Remove two screws securing insulation
panel to oven liner.
Two screws
Insulation
panel
Figure 6.3.26
8 screws
7) Remove
wrapper.
8) Undo two screws securing left hand
counter bracket to oven and remove.
Replace, ensuring that bracket is installed
with roller to top.
Figure 6.3.23
Figure 6.3.25
10) Prise open the insulation panel to allow
access to the right hand counter bracket.
Undo two screws securing bracket, and
remove bracket.
11) Replace, ensuring roller to top of bracket.
Re-assemble in reverse order.