8
4: Sahara Fan Installation & Removal
The Sahara-Fan heater fitted provides excellent balanced heating
coupled with energy savings. The unit can be easily removed & replaced
for cleaning or maintenance as it has a simple bayonet & clip fastening
system. The diagrams below demonstrate the removal of the hot
cupboard Sahara fan. As the fan is located in the base of the cupboard,
access to the Plug & socket is via the underside of the unit (fig 4).
1. Locate the fixing clip on the ‘Male’ plug fitted to the
Sahara fan & unclip as shown in (fig 4a)
2. Prise the female socket off the plug (fig 4b)
3. Remove as many rodded shelf sections as needed to allow
access to the Sahara fan. Lift out at a slight angle taking
care not to damage the plug attached to the fan (fig 5)
Although not shown in figure 5; the Sahara fan supplied has
a protective St/steel cover over the top air intake. This shields
the fan innards from any food or liquid spillage from above.
Fitting is a reversal of the above.
When fitting the socket into the plug on the fan, take
care to line up the locating protrusion on the ‘Male’ plug
with the locating cut-out on the Female socket (Fig 4c).
