Lift
Rod
3/4”
(19mm)
Max. Deck
Thickness
Cold
1/2" NPT
Hot
1/2" NPT
4“
(102mm)
4-1/4“
(108mm)
4“
(102mm)
3“
(76mm)
3-7/8“
(98mm)
6-3/16“
(157mm)
DESCRIPTION
•
Metal construction with various finishes identified by suffix
•
1/2" IPS connections
•
Includes metal pop-up waste assembly
OPERATION
•
Lever style handles
•
Maximum handle(s) rotation angle is 90˚ to full on
•
Rotate hot side counterclockwise to open (clockwise to close)
•
Rotate cold side clockwise to open (counterclockwise to close)
FLOW
•
Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi,
for products made before October 2008 flow is limited to
2.2 gpm max (8.3 L/min)
CARTRIDGE
•
1224 cartridge design
•
Nonmetallic and stainless steel material
STANDARDS
•
Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,
ANSI A117.1, and all applicable requirements referenced therein
•
Certified to ANSI/NSF 61/9
•
Contains no more than 0.25% weighted average lead content
•
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
•
ADA
for lever handles
WARRANTY
•
Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
•
5 year warranty if used in commercial installations
EVA™
4" Lavatory Faucet
with Metal Waste Assembly
Models:
6410 series
Bulk Models:
66410, 66411*
(Bulk packed 6 per carton),
50/50 waste assembly
*Includes hot (red) and cold (blue) indicators.
NOTE:
THIS FAUCET IS DESIGNED TO BE
IN STALLED THRU 3 HOLES, 1" MIN. DIA.
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 3/11
