Moeller Rapid Link, Switching And Installation System, Page: 132 / 162

Speed controller RA-SP
01/08 AWB2190-1430GB
128
F-11 Fixed frequencies (SPD)
With RA-SP up to four user-definable fixed frequencies can be
selected.
Table 29: Defining reference fixed frequency stage 0
Designation PNU Fn No. Parameterization AS-Interface
®
Manual mode
F-11 DQ0 DQ1 DQ2 DQ3
0
f
0
– – Spindle potentiometer
n
0
;
alternatively: PNU F01&A20
– – 0 0 Selector switch (HAND, FWD,
REV)
FF1
f
1
A21 SPD1 digital (30 Hz) – – 1 0 –
FF2
f
2
A22 SPD2 digital (40 Hz) – – 0 1 –
FF3
f
3
A23 SPD3 digital (50 Hz) – – 1 1 –
FWD – – – – 1 0 – – FWD, HAND
REV – – – – 0 1 – – REV, HAND
Figure 123: Functional overview: fixed frequencies
REV
FWD
FF2
FF1
f
0
f
0
f
1
f
2
f
2
f
3
h If one or more of the fixed frequencies exceeds 50 Hz you
must first increase the end frequency with PNU A04
(
a section “F-01 End frequency (F-MAX)”, page 123).
h
Fixed frequency stage 0 (none of the inputs FF1 to FF3 are
activated) corresponds to the frequency reference value,
which an be specified with the built-in potentiometer.
Alternatively, you can set the fixed frequency with PNU
F01&A20,
a table 29.
PNU Designation Value Function FS
A01 Reference
frequency
input 00 – 01
01 Definition through potentiometer under the screw cap, a figure 109 on
page 104.
02 Derfinition through PNU F01&A20
A20 Reference
frequency 0.5 to 360 Hz You can enter a frequency reference value. You must set PNU A01 to 02
for this purpose. 0.0