Hardware required. Screwdriver not included
Hardware required. Screwdriver not included
Repeat Step 6 to secure the
Back Panel 1 (5)
and the
Back Panel 2 (16)
to the
Vertical Panel 4 (14)
and
Vertical Panel 3 (13)
.
This assembly namely
Back Frame Assembly
8.1- Lay flat the
Side Panel Left (1)
which already assembled with 4 pieces of
Wood Dowel (A)
and 3 pieces of
Cambolt (B)
.
8.2- Insert
Camlock (C)
from the pre-drilled hole of the
Bottom Panel (3)
then properly align the Wooden Dowel
to the pre-drilled hole of the
Side Panel Left (1)
.
8.3- Once aligned and attached, make sure to secure
Camlock (C)
from the
Bottom Panel (3)
to the
Cambolt (B)
of the
Side Panel Left (1)
.
8.4- Repeat steps to secure the
Base Panel 1 (4)
to the
Side Panel Left (1)
as shown.
Hardware (L)
face front.
